NEC ELECTRA ELITE IPK II, Руководство по программированию

Страница: 585 / 617

Document Revision 1 Electra Elite IPK II
2 - 550 Program 90 : Maintenance Program
Description
Use Program 90-11 : System Alarm Report to define the details of the system alarm
report.
Program 90 : Maintenance Program
90-11 : System Alarm Report
Level:
IN
Input Data
Item
No.
Item Input Data Default
01 System Alarm Display Telephone
Assign the display multiline extension number that
should receive system alarms.
Extension Number
(Up to 8 digits)
No Setting
02 Report Method
When alarm reports are to be EMailed, set this
option to “1”.
0 = No Report
1 = EMail Address
0
03 --- Not Used ---
04
--- Not Used ---
05 --- Not Used ---
06 SMTP Host Name
When alarm reports are to be EMailed, set the SMTP
name (ex: smtp.yourisp.com). Contact your ISP
(internet service provider) for the correct entry if
needed.
Up to 255 Characters No Setting
07 SMTP Host Port Number
When alarm reports are to be EMailed, set the SMTP
host port number. Contact your ISP (internet service
provider) for the correct entry if needed.
0~65535 25
08 To EMail Address
When alarm reports are to be EMailed, set this EMail
address to which the report should be sent.
Up to 255 Characters No Setting
09 Reply Address
When alarm reports are to be EMailed, set this EMail
address to which any replies should be EMailed.
Up to 255 Characters No Setting
10 From Address
When alarm reports are to be EMailed, set this EMail
address from which the report is being sent.
Up to 255 Characters No Setting