NEC Dterm DTL-RPT-2, Руководство пользователя

Страница: 17 / 30

D
term
Cordless DECT Issue 1.0
DTL-RPT-2 Cordless DECT Repeater Guide 2 - 5
___________________________________________________________________________________
___________________________________________________________________________________
S
ECTION
4 S
ETTING UP YOUR
R
EPEATER
Setting up the repeater involves four basic steps:
1. Install the AC adapter on the repeater unit.
2. Register the repeater to the base.
3. Position the repeater at the proper installation site.
4. Install the repeater in its final location.

Use ONLY the power adapter that came with your repeater. A different power
adapter may cause an electrical hazard or damage the repeater.

You can register up to six repeaters to a base. Repeat these steps as needed.
These procedures refer to items on the back of the DTL-RPT-2 Repeater:
Figure 2-5 Back View of the DTL-RPT-2 Repeater