NEC DT900 Series, Руководство пользователя

Страница: 55 / 214

. . . . .
DT900/DT900S Series Phone User Guide
3-35
Figure 3.8 Multi settings icon
3
Press the Settings icon.
Figure 3.9 Settings icon
4
Select
1
User Settings.
To connect a headset (Optional)
Note:
For information on connecting a Jabra Bluetooth headset to your phone, refer
to the Bluetooth Support chapter in this manual.
1
Press the Menu key on the phone.
2
Select
3
User Settings.
3
Select
2
Headset.
4
Select
1
Enable/Disable.
5
Select
2
Enable.
6
Press Enter
b
on the cursor pad or the OK softkey to accept the setting.
7
Insert the headset cord plug into the HEADSET connector on the back of the phone, until
you hear a click.
Figure 3.10 Headset Connector
To connect a computer (Optional)
Note:
Any devices connected to the phone’s PC port will momentarily disconnect
from the network when the phone is rebooted, or if disconnect if there is a loss
of power to the phone.
You can connect a computer to the network through the phone using a LAN cable if
there are a limited number of available ports on your local area network.