manualshive.com logo in svg

NEC DT820 Series, Руководство пользователя

Поделиться
Скачать
NEC DT820 Series Скачать руководство пользователя страница 176

C A L L   H I S T O R Y,   A N D   T H E   C O R P O R AT E   A N D   P E R S O N A L   D I R E C T O R I E S

Call History

10 -156

DT820 Phone User Guide

Table 10.2

Monitor Presence LED Colors for Speed Dial Keys

Note:

Phones do not publish presence information. Depending on other phones on 
your system and any phone application software that you use, you may see 
different LED behavior for different presence states.

8

Press the Save softkey to save the entry.

The phone will confirm that the entry was added to the Personal Directory.

Note:

If the Call History entry is already in your Personal Directory, you can edit the 
entry information. For information on editing a Personal Directory entry, see 
“Adding or Editing a Personal Directory Entry” on page 10 -161.

9

Press Enter 

b 

on the cursor pad or the OK softkey to return to the Personal Directory, 

or press the Exit key to return to the main phone screen.

 

D E L E T E   C A L L   H I S T O R Y   I N F O R M A T I O N

Note:

Call History information is not saved permanently on the phone, it is only 
stored on your phone until the phone restarts. All previous Call History 
information is deleted when you restart your phone.

If your system is configured for User Portability, Call History information is not 
stored on the phone, it is downloaded from and saved to the network. You can 
still use the phone to delete specific Call History entries or all Call History 
information.

To delete a specific entry from the Call History

1

Press the Menu key.

Type

Status

Programmable

Key LED

Line Key

Registered

LED is not lit

Unregistered

LED is not lit

Speed Dial Key
(No Monitoring)

Not Available

LED is not lit

BLF

Idle

LED is not lit

Ringing (SIP@Net)

Blinking Red

Ringing (3C system)

Blinking Green

Subscription Failed

LED is not lit

Online (3C system)

(Phone is Online)

Green

On the Phone
(Phone is in use)

Red

Held (3C system)

Blinking Red

Busy

Red

Содержание DT820 Series











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды