NEC D400 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 68

background image

General safety

l

Observe ‘Turn off 2-way radio’ signs, such as those near stores of fuel, chemicals or explosives.

l

Do not allow children to play with the phone, charger or batteries.

l

A small rubber bung (for antenna socket protection) is included in the carton. Keep this out of reach of small children, for whom it could be hazard.

l

The operation of some medical electronic devices, such as hearing aids and pacemakers, may be affected if a cellphone is used next to them. Observe any warning signs and

manufacturer’s recommendations.

Road safety

l

You

MUST

exercise proper control of your vehicle at all times.

l

The handset or hand-held microphone should not be used while driving. Find a safe place to stop first or use the hands-free kit available.

l

Do not speak into a hands-free microphone if it will take your mind off the road.

l

You

MUST NOT

stop on the hard shoulder of a motorway to answer or make a call, except in an emergency.

l

Switch off your cellphone at a refuelling point, such as a petrol station, even if you are not refuelling your own car.

l

Do not store or carry flammable or explosive materials in the same compartment as a radio transmitter, such as a cellphone.

l

You must not use the phone’s car kit alert device to operate the lights or horn of your vehicle while on a public road.

l

Electronic vehicle systems, such as anti-lock brakes, speed control and fuel injection systems are not normally affected by radio transmissions. The manufacturer of such equipment can

advise if it is adequately shielded from radio transmissions. If you suspect vehicle problems caused by radio transmissions consult your dealer and do not switch on your phone until it has

been checked by qualified approved installers.

Third party equipment

The use of third party equipment, cables or accessories, not made or authorised by NEC, may invalidate the warranty of your cellphone and also adversely affect the phone’s operation. For

example use only the NEC mains cable supplied with the AC charger.

Service

The cellphone, batteries and charger contain no user-serviceable parts. We recommend that your NEC cellphone is serviced or repaired by an NEC authorised service centre. Please contact

your Service Provider or NEC for advice.

Non-Ionising Radiations

The radio equipment shall be connected to the antenna via a non-radiating cable (e.g. coax).

The antenna shall be mounted in a position such that no part of the human body will normally rest close to any part of the antenna unless there is an intervening metallic screen, for example,

the metallic roof.

1
2
3
...
»

Содержание D400





































































Отзывы:

Нет отзывов

Похожие инструкции для D400

Бренд: Samsung Страницы: 114

Бренд: Samsung Страницы: 8

SCH-a610 Series

Бренд: Samsung Страницы: 12

Бренд: Samsung Страницы: 28

Бренд: Samsung Страницы: 28

Бренд: Samsung Страницы: 35

Бренд: Ecom Instruments Страницы: 64

Бренд: M4 Страницы: 19

Бренд: Uriver Страницы: 109

Бренд: Klein Electronics Страницы: 2

Бренд: Yealink Страницы: 19

Бренд: Maxcom Страницы: 109

Бренд: Sony Ericsson Страницы: 99

Бренд: QUO Страницы: 28

Бренд: Yealink Страницы: 8

Бренд: Plum Страницы: 17

Бренд: M4 Страницы: 19

Бренд: Dartel Страницы: 43

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды