To Connect NEC Conference Max
1. Connect the Cat. 5 cable from the Link Out jack on the base unit to the Link In
jack on the conferencing pod.
2. Connect the base unit to the telephone jack using the RJ-11 telephone cable.
3. Connect the power cord to the base unit and plug the power cord into an
electrical outlet.
To Connect Additional Units
1. Connect the 12' Cat. 5 cable to the Link Out jack on the first phone and the
Link In jack on the second phone.
2. Continue linking up to three additional NEC Conference Max phones in the
same fashion. A total of four units may be connected.
C O N F E R E N C E P H O N E S E T U P
Guide
To Access the Programming Menus
Press and hold until appears on the LCD screen. Then press the key that
corresponds with the desired menu option and follow the instructions below.
P RO G R A M M I N G O P T I O N S
NEC Conference Max
A u d i o C o n f e r e n c i n g
*Press and hold the "1" key to enter a hyphen or the "*" key to enter a space in the number. If a number has already
been programmed, use CLEAR to delete the old number before entering the new number.
Ringer Melody
1
Dialing Mode
2
Flash Duration
3
Local Number*
4
Conference*
5
Service*
6
Key
Programming
Menu Option
1-5 to select a new melody. Press to save selection.
Press . The current melody selection flashes. Press
1 for tone, 2 for pulse. Press to save selection.
Press . The current dialing selection flashes. Press
Press . Enter the phone number that you want the
Conference key to dial. Press to save the number.
duration. 1 = 600ms, 2 = 300ms, 3 = 150ms, 4 = 100ms, 5 = 80ms.
Press . The current duration flashes. Press 1-5 to select
Press to save selection.
appear on the LCD screen when the phone is in standby.
Press . Enter the phone number that you want to
Press to save selection.
Press . Enter the phone number that you want the
0
key to dial. Press to save the number.
Country
7
Press . Press the number key that corresponds with the
desired country. 1 = US/Canada/China/Japan/Mexico/Singapore,
2 = Europe CTR 21, 3 = Australia, 4 = S. Africa, 5 = Brazil, 6 = New Zealand,
7 = South Korea. Press to save the country setting.
Press CLEAR once to return to the previous menu level or hold to exit Programming mode
without saving changes.
!
CAUTION
: Read the Safety Information in the user manual.
25' Cat. 5 cable
RJ-11
telephone
cable
To Link In
To Link Out
Rear of conferencing pod
Rear of base unit
12' Cat. 5 cable
From Link Out
To Link In
To Link In
To Link Out on Base Unit
25' Cat. 5 cable
© 2005 . All rights reserved. No part of this document may be reproduced in any form or by any means without written
permission from NEC. NEC reserves specific privileges. Information in this document is subject to change without notice.
NEC Conference Max is protected by U.S. Patent No. D499,392 Part No. 800-157-251 (Rev. BETA)
