NEC C551Q Скачать руководство пользователя | Manualshive

Страница: 59 / 59

background image

English-57

English

1. MPEG-4 AVC

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF
A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY
A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM

2. MPEG-4 Visual

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND
COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.

[Notice] About the MPEG-4 AVC,

MPEG-4 Visual license included in this product

«
...
57
58
59

Содержание C551Q




























































Отзывы:

Нет отзывов

Похожие инструкции для C551Q

MultiSync XG-1352

Бренд: NEC Страницы: 38

Бренд: Samsung Страницы: 2

Бренд: Raymarine Страницы: 12

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 148

SyncMaster 2023 NW

Бренд: Samsung Страницы: 68

SyncMaster 720B

Бренд: Samsung Страницы: 78

Бренд: Eneo Страницы: 44

Бренд: ACO Страницы: 4

Бренд: Collins Страницы: 23

RadiForce RX211

Бренд: Eizo Страницы: 53

Бренд: Cooler Master Страницы: 18

Бренд: Dynamic Displays Страницы: 29

Бренд: Crystal Image Technologies Страницы: 32

Бренд: Steren Страницы: 25

Бренд: BenQ Страницы: 35

Бренд: Tandy Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды