NEC C551Q Скачать руководство пользователя

Страница: 51 / 59

English-49

English

Using the “SET/POINT ZOOM” button on the remote control enlarges part of the screen image.

Press the CH+/- button to zoom in or out. The image can be expanded up to 10 times.

1 Press the [SET/POINT ZOOM] button on the remote control. The icon looks like a magnifier.
2 Move the magnifier icon with the [ ] [ ] [+] [-] buttons.

3 Press the [CH+] to zoom in. Press [CH-] to zoom out.

4 Press the [SET/POINT ZOOM] to let the icon disappear.

5 Press the [EXIT] to return to the normal image size.

6 Press the [MENU] to open the OSD menu.

NOTE:

•

When using this function the image may look distorted.

• This function

is not available when set to SCREEN SAVER, CLOSED CAPTION and TILE MATRIX.

• When

ZOOM is selected in ASPECT, the image will change to FULL. Then start with POINT ZOOM.

After exiting POINT ZOOM, ASPECT will return to the previous ASPECT settings. When ASPECT is changed

during the POINT ZOOM operation, ZOOM will be set to FULL image.

• The magnifier icon does not move to a no image area.

•

POINT ZOOM returns

to the normal image size

after changing the input signal or when the monitor is powered off.

• POINT ZOOM

will become inactive when changing the ASPECT setting during the POINT ZOOM operation.

•

When the POINT ZOOM is active, the STILL function is not available.

POINT ZOOM

Содержание C551Q




























































Результаты поиска

Содержание C551Q

Отзывы:

Похожие инструкции для C551Q

Бренды по названию

Популярные бренды

NEC C551Q, Руководство пользователя

Результаты поиска

Содержание C551Q

Отзывы:

Похожие инструкции для C551Q

Бренды по названию

Популярные бренды