NEC BBU, Руководство пользователя

Страница: 8 / 29

5
Power Supply and Power Cord Use
CAUTION
Disconnect the power cord(s) before installing or removing the product
in/from the server.
Make sure to power off the server and disconnect the power cord(s) from the power
outlet before installing/removing the product in/from the server, or connecting with
the peripheral devices. All voltage is removed only when the power cords are
unplugged.
Always observe the following to prevent an electric shock or fire that could be
aused by a damaged cord. c
„
Do not stretch the cord harness.
„
Do not pinch the power cord.
„
Do not bend the power cord.
„
Keep chemicals away from the power cord.
„
Do not twist the power cord.
„
Do not place any object on the power cord.
„
Do not bundle power cords.
„
Do not alter, modify, or repair the power cord.
„
Do not secure the power cord with staples or equivalents.
„
Do not use a damaged power cord. (Replace a damaged power cord with a
new one of the same specifications. Ask your sales agent for replacement.)
Do not hold the power plug if your hands are wet.
Do not disconnect/connect the plug while your hands are wet. Failure to follow this
warning may cause an electric shock.
Do not pull the cable when disconnecting the power cord.
When disconnecting the power cord from the server, hold the plug and pull it straight
out. Pulling the cord out by the cable portion could damage the cable to result in an
electrical shock hazard or a fire.