manualshive.com logo in svg

NEC Aspire L, Сетевое руководство, Страница: 89 / 256

Поделиться
Скачать
NEC Aspire L Скачать руководство пользователя страница 89

Features

Paging

Networking

◆

79

Paging

Paging

An extension user can make internal or external pages to a networked system. Paging to a net-
worked system can only be activated by dialing a service code and the target network’s system ID.

Operation

To Make an Internal Page

1.

Dial 801.

2.

Dial # and the system ID.

The system ID must be dialed as 2 digits (ex: #02).

3.

Dial the Paging Zone number (00-64).

 Dialing 00 calls All Call External Paging.

4.

Make announcement to the networked system.

5.

Press SPK to hang up.

To Make an External Page

1.

Dial 803.

2.

Dial # and the system ID.

The system ID must be dialed as 2 digits (ex: #02).

3.

Dial the Paging Zone number (0-9).

 Dialing 0 calls All Call Internal Paging.

4.

Make announcement to the networked system.

5.

Press SPK to hang up.

To Make a Combined Page

1.

Dial *1.

2.

Dial # and the system ID.

The system ID must be dialed as 2 digits (ex: #02).

3.

Dial the Paging Zone number (0-9).

 Dialing 0 calls All Call Combined Paging.

4.

Make announcement to the networked system.

5.

Press SPK to hang up.

Содержание Aspire L

































































































































































































































































Отзывы:

Нет отзывов