background image

English-21

English

Features

DisplayPort: 

DisplayPort is designed to be the future-ready and scalable solution for high performance digital display 

connectivity. It enables the highest resolutions, the fastest refresh rates and deepest color depths over standard cables.

DisplayPort OUT:

 This monitor has a DisplayPort out connector for daisy-chain connection. Multiple monitors can be connected 

without complicated cable management.

HDMI: 

HDMI is designed to be the future-ready, scalable solution for high performance digital display connectivity. It enables 

the highest resolutions, the fastest refresh rates and deepest color depths over standard cables, especially for consumer audio/
video equipment.

UNIFORMITY:

 This feature compensates for slight variations in the white uniformity level that may occur on the screen and 

improves the color and evens out the luminance uniformity of the display.

Response Improve:

 Improved gray to gray response.

Color Control Systems: 

Allow you to adjust the colors on your screen and customize the color accuracy of your monitor to a 

variety of standards.

sRGB Color Control: 

A new optimized color management standard which allows for color matching on computer displays 

and other peripherals. The sRGB, which is based on the calibrated color space, allows for optimal color representation and 
backward compatibility with other common color standards.

ErgoDesign Features: 

Enhanced human ergonomics to improve the working environment, protect the health of the user and 

save money. Examples include OSD controls for quick and easy image adjustments, tilt base for preferred angle of vision, small 
footprint and compliance with MPRII and TCO guidelines for lower emissions.

Plug and Play: 

The Microsoft

®

 solution with the Windows

®

 operating system facilitates setup and installation by allowing 

the monitor to send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically 
optimizing display performance.

Intelligent Power Manager System: 

Provides innovative power-saving methods that allow the monitor to shift to a lower power 

consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions and lowering the 
air conditioning costs of the workplace.

Multiple Frequency Technology: 

Automatically adjusts monitor to the display card’s scanning frequency, thus displaying the 

resolution required.

VESA Standard Mounting Interface: 

Allows users to connect your MultiSync monitor to any VESA standard third party 

mounting arm or bracket.

Adjustable stand with pivot capability:

 Adds fl exibility to your viewing preferences.

USB hub 

adds excitement to your computing by connecting you to digital cameras, scanners and more.

USB Monitor Control:

 Allow you to adjust each item through application software by connecting an USB cable.

Human Sensor:

 Shifts to a lower power consumption level when a person leaves the monitor, saving your monitor energy 

costs.

NaViSet Software 

offers an expanded and intuitive graphical interface, allowing you to more easily adjust OSD display settings 

via mouse and keyboard.

Environmental Impact: 

Annual typical maximum operating carbon footprint of this monitor (world-wide average) is 

approximately 45.5 kg (calculated by: rated wattage x 8 hours per day x 5 days a week x 45 weeks per year x Power-to-Carbon 
conversion factor - conversion factor is based on OECD publication of global CO2 emissions 2008 Edition). This monitor has a 
manufacturing carbon footprint of approximately 51.2 kg.

Note:

 The manufacturing and operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC 

for its monitors.

ControlSync: 

Follow the steps of “DATA COPY” and copy the settings from the master monitor to the sub monitors 

by connecting the ControlSync cable. When the setting of the master monitor is adjusted, it is sent to the sub monitors 
automatically, providing easy setting controls in a multiple monitor environment.

Customize Setting: 

Allows to store the current settings and recover stored settings.

Low Blue Light:

 This monitor has a blue light reducing function. This means hazardous light from the monitor is substantially 

reduced and it allows to free from eyestrain (see page 17).

Содержание 60003811






























Отзывы: