NEBRA ROCK Pi, Быстрый старт

Страница: 2 / 10

INDOOR HOTSPOT QUICK START GUIDE
• The Indoor unit’s case is designed to be used indoors, and is not suitable
for use outdoor usage.
• The ROCK Pi Indoor hotspot comes with a 12v power adapter, so
don’t use that adapter to power any generic Type-C devices like a
mobile phone or anything and vice versa, it will damage the device.
Note: If you want place your miner outside, please consider our IP67 rated
weatherproof outdoor hotspot miner.
Preparing Nebra ROCK Pi Indoor Hotspot
Step 1: First screw in the included antenna into the connector on the back of
the hotspot.
Figure 2: Indoor Hotspot Included
If you are using wired connection, plug an ethernet cable in between a router
and the ethernet port on the hotspot.
Step 2: Next find a suitable location for your Hotspot to be positioned, to
provide the best coverage we recommend placing it near a window just out
of direct sunlight. You’ll need to be near a mains power source too.
Please check “Ideal Hotspot Placement” Guide
Step 3: Assemble the appropriate adapter for country onto the universal
power supply, plug into mains power and insert power cable into the hotspot.
Step 5: When the hotspot is powered up, the lower orange LED will be on. It
will take up to 5 minutes to configure after the first boot.
2 Nebra LTD. 2021