Page 2 of 6
November 2013
e
a
t
e
r
.co.uk
Under the Table Top
Mounting brackets with Screws
(with black plastic tops) for
holding to the frame
Guide Rail fits around
Top Bar of the Table Frame
The Table Frame Unfolded
To adjust height:
•
If top is fitted, loosen the Mounting
Bracket Screws before adjusting height
•
Loosen Screw (with black plastic top)
•
Press in Spring Plunger with flat of
thumb. TAKE CARE not to push finger
in too far as it could get trapped.
•
Adjust height ensuring Spring Plunger
engages with a hole in the Frame
- one hole at a time each side
•
Ensure all Screws are retightened
•
Retighten the Mounting Bracket
Screws holding the Top.
