Neat NEO IP/GSM Скачать руководство пользователя страница 50

Страница: 50 / 56

NEO IP/GSM Technical Handbook

Document number: NE41 09002-02 v2.0

8.14.3 Radio setup

Configuration

Select whether the NEO IP/GSM should work in 869 or 868 MHz frequency band.

Default is 869 MHz.

Radio calibration

and

Radio class 1 calibration

These bits of information are read only and displays the radio calibration bits

stored in the NEO IP/GSM unit.

8.15 IP tab

Picture 27.

The IP tab

8.15.1 Ethernet

MAC number

The physical network address of the unit, the value is read only.

Network enable and WAN enable

If Network enable is unchecked, the network interface is disabled. If Network is

enabled and WAN is not, then the unit works in a LAN setup only. I.e. the unit will

not be able to access the Internet.

NTP, STUN and PING server

Usually the predefined values works fine, but can be changed if there are prob

lems, e.g. firewall problems, and/or other servers wish to be used. This should

only be done in conjunction with the SIP operator or NEAT Electronics AB.

Static IP enable

Check this box if a static IP address is to be used, otherwise the DHCP server in

the LAN will assign an IP, gateway and DNS server address to the unit.

NEO IP Programmer software

50 of 56

Содержание NEO IP/GSM

























































Результаты поиска

Содержание NEO IP/GSM

Отзывы:

Neat NEO IP/GSM, Техническое руководство, Страница: 50 / 56

Результаты поиска

Содержание NEO IP/GSM

Отзывы: