NEO IP/GSM Technical Handbook
Document number: NE41 09002-02 v2.0
2
Operating the unit
This chapter is intended for using the NEO IP/GSM without the NPU, i.e. the
functions described are how to use the NEO IP/GSM with the buttons etc. All
functions are also programmable with the NPU and Programmer software and is
indicated with a computer icon to the left of the paragraph.
2.1
The buttons and indicators
2.1.1
Alarm button
The red
Alarm button
is illuminated (the alarm LED) and is used for
•
Send a user alarm
2.1.2
Reset button
The green
Reset button
can perform different functions:
• Reset an initiated alarm call, see 2.2.2 Resetting an alarm.
• Initiate a poll to the NEAT Web Service, see 8.4.3 Network read from NEO IP/
• Perform a GSM Network quality test, see 2.2.8 Testing the quality of the GSM
• Initiate a Radio Coverage Test, see 2.2.7 Radio coverage test.
2.1.3
Extra button
The white
Extra button
can perform many different functions:
• Adjust the volume of loudspeaker, see 2.2.3 Volume control.
• Program radio transmitters, see 2.2.4 Connecting radio equipment.
• Presence and Ready indication, see 5.6 Presence and Ready indication.
• Sending a special alarm with optional alarm type, e.g. a service call or to a
relative.
2.1.4 The front LEDs
The LEDs in the front of the unit indicates visually if there is a problem in the
operation of the unit.
•
Network/GSM (green)
•
AC (yellow)
• Battery (red)
For further explanation, see 2.3.2 LEDs on the front on page 16.
Operating the unit
11 of 56
