Neat INKA, Техническое руководство, Страница: 6 / 36

INKA, IOR, REPO & LINK
1.2.2 IOR – Radio Transceiver for Wired I/O
Radio transceiver IOR is intended to monitor wired in- and outputs. When one of the inputs is
activated a radio signal will be sent to the receiving unit, which is normally either a home care phone
(NEO) or a portable transceiver (TREX or HOME). When IOR itself has received a pre-programmed
radio code, usually from an ATOM or an INKA, the output will be activated. The unit can handle up to
five digital inputs and one output. The output can be configured to have a pulse, toggle or static
function.
IOR has the appearance as in the picture below. The size of the plastic cover is 65 x 65 x 23 mm, not
including the mounting flanges. The width with the mounting flanges is 89 mm and the distance
between the mounting holes is 76 mm.
Under the lid there is a rechargeable 3.6V NiMH-battery. There is also a LED, a button and 6 jumpers
for basic configuration of the unit.
Power switch
Jumpers 1-3
Rechargeable
battery
Jumpers 4-6
LED
Button
Output connector
Input connector
NPU & power
connector
IOR front view IOR inside view
Technical Handbook for the IOR Family (firmware v20.x), document number NE41 06007-02 v1.0
6