Neat INKA, Техническое руководство, Страница: 5 / 36

INKA, IOR, REPO & LINK
1.2 Overview
1.2.1 INKA – Radio Transmitter for Wired Inputs
Radio transmitter INKA is intended to monitor wired inputs. When one of the inputs is activated a radio
signal will be sent to the receiving unit, which is normally either a home care phone (NEO) or a
portable transceiver (TREX or HOME). The unit can handle up to five inputs, three of which are digital
and two that can be configured as digital or analog. The analog inputs can either continuously monitor
a level or just take a sample value when one of the other inputs is activated.
INKA has the appearance as in the picture below. The size of the plastic cover is 65 x 65 x 23 mm, not
including the mounting flanges. The width with the mounting flanges is 89 mm and the distance
between the mounting holes is 76 mm.
Under the lid there are two batteries, size AAA (LR03). There is also a LED, a button and 6 jumpers
for basic configuration of the unit.
Power switch
Jumpers 1-3
Jumpers 4-6
Batteries
LED
Button
Input connector
NPU & power connector
INKA front view INKA inside view
Technical Handbook for the IOR Family (firmware v20.x), document number NE41 06007-02 v1.0
5