Emodulinx Introduction
www.ndtjames.com 35
Emodulinx Introduction
The Emodum
eter’s Emodulinx software enables the user to upload
data from the Emodumeter device to a PC. The saved data can be
read in and graphed. Emodulinx also can be used to control the
Emodumeter remotely. Configuration settings can be adjusted, and
new data sets can be collected, all remotely. When commanded
remotely to take a new set of data measurements, the Emodumeter
will upload the new data to the PC, and Emodulinx will
automatically save the data to a file. Existing individual data sets
can also be uploaded and graphed to further analyze the
Emodumeter data. The addition of the remote control functionality
makes the Emodumeter a very powerful tool.
Features
The ability to execute a test remotely and graph FFT.
The ability to review previous test parameters.
The ability to adjust Test menu, Setup menu, and E/Mu
menu parameters. These items include: the amplifier
gain, the picture rate, the pulser voltage, the E or Mu
calculation method, the material density, the
measurement mode, the materials travel distance or
time, the cycle time, and the number of pulses per
sequence.
Minimum System Requirements
Emodulinx V-E-420
Operating System
Windows Vista or Windows 7
Memory
1 GB RAM
Processor
1 GHz Pentium class processor
Capacity
1 MB hard drive space
