6. TEMPRA BATTERIES
PARALLEL
You can connect up to 4
TEMPRA
Lithium Batteries in
parallel,
series connection is not allowed.
Follow the instructions for correct installation:
1. Select Master mode on one of the batteries and set
the other Tempra to Slave. Act on Dip Switch No. 4
(Chapter 10).
2. Make the electrical connection in parallel.
3. Create the
N-BUS
network - connect the data cable
forming a chain from one battery to the next
(connect any other
NDS N-BUS
devices present).
9
NOTE
•
The connection cable between several
N-BUS
devices is a 6-
pole (straight through) cable with RJ11 6C/6P connectors at
both ends. It is possible to buy a pre-assembled
NDS
cable
available in different models and lengths
BC 03M
(3m),
BC
06M
(6m) and
BC 10M
(10m).
•
The
N-BUS
cable for
DTB01
display is a proprietary
NDS
cable,
and it is different from BC 03M, BC 06M and BC 10M.
N-BUS
Содержание TEMPRA TBL 100
Страница 31: ...29 ...