NDI BirdDog P200 Скачать руководство пользователя страница 21

Страница: 21 / 64

Camera Menus

Exposure Menu

Mode

Full Auto: The exposure is adjusted automatically using the value set for EX-COMP.

Manual

Allows manual adjustment of the GAIN, GAIN LIMIT, shutter speed (SPEED), iris (IRIS), and HIGH SENSITIVITY.

Iris Pri: Iris Priority mode. This mode allows you to set a fixed IRIS with exposure achieved by automatic setting of

SPEED, GAIN LIMIT, and EX-COMP.

Shutter Pri: Shutter Priority mode. This mode allows you to set a fixed shutter SPEED with exposure achieved by

automatic setting of IRIS, GAIN LIMIT, and EX-COMP. When you select one from various exposure modes, some of

the following setting items that are required for the selected mode will be displayed.

Gain

Select the gain.

Gain Limit

The gain limit can be set at Full Auto, Shutter Priority, Iris Priority, Bright, Spot Exposure and Manual in AE mode.

This is useful to limit the automatic setting of gain which can lead to excessive image noise at extreme settings.

High Sensitivity

This function increases the max gain to allow bright output in darker environments. However, with a strong gain (up

to 10×), the captured image may contain considerable noise.

Speed

When video format is set to 720P25, 1080P50, 1080i50, 1080P25 or 720P50, shutter speed can be selected from the

following:

•

1/1, 1/2, 1/3, 1/6, 1/12, 1/25, 1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000, 1/1250, 1/1750,

1/2500, 1/3500, 1/6000, 1/10K.

When video format is set to 720P30, 1080i59.94, 1080P29.97, 720P59.94, 1080P59.94, 1080I60, 1080P30, 1080P60 or

720P60, shutter speed can be selected from the following:

•

1/1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/90, 1/100, 1/125, 1/180, 1/250, 1/350, 1/500, 1/725, 1/1000, 1/1500, 1/2000,

1/3000, 1/4000, 1/6000, 1/10K.

Iris

Select the iris the following: CLOSE, F14, F11, F9.6, F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2.8, F2.4, F2.0, F1.6.

Slow Shutter

When set to “ON,” the slow shutter functions automatically in low light conditions. This setting is available only

when the AE mode is set to “Full Auto.” The default setting is Off.

S. Shutter Limit

With certain settings in low light conditions, the shutter speed slows and the gain is increased. This function allows

you to limit the shutter speed reduction. This helps prevent image shake when shooting a moving subject in low

light conditions.

AE Response

The slow AE Response function allows you to reduce the exposure response speed. By default, optimum exposure

can be obtained automatically within approx. 1 second. The slow AE response function allows you to lengthen this

response time.

Содержание BirdDog P200

































































Результаты поиска

Содержание BirdDog P200

Отзывы:

Похожие инструкции для BirdDog P200

Бренды по названию

Популярные бренды

NDI BirdDog P200, Руководство пользователя

Результаты поиска

Содержание BirdDog P200

Отзывы:

Похожие инструкции для BirdDog P200

Бренды по названию

Популярные бренды