manualshive.com logo in svg

NDD EasyOne, Руководство оператора

Поделиться
Скачать
NDD EasyOne Скачать руководство пользователя страница 3

Preface

Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect

© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch

3/144

4

 

1.5

Intended audience of this Operator’s Manual

This Operator’s Manual is intended for general practitioners, specialists, and 
health care professionals. General practitioners, specialists, and health care 
professionals are expected to have working knowledge of medical 
procedures, practices, and terminology as required to conduct or interpret 
diagnostic spirometry tests.

1.6

Using this Operator’s Manual

Read this Operator’s Manual prior to operating 

EasyOne Air

 and 

EasyOne Connect

.

Store the Operator’s Manual in a safe and easily accessible place.

1.7

Application Notes for further information

You can find further information on specialized topics in Application Notes on 
the 

ndd

 website.

http://AppNotes.ndd.ch
For the US http://AppNotes.nddmed.com

1.8

Legal information

Due to continuing product innovation, specifications in this manual are 
subject to change without notice.
© ndd Medizintechnik AG, Zurich, Switzerland. All rights reserved.
No part of this manual may be reproduced without written permission from 

ndd

.

ndd

, 

ndd new diagnostic design

 and 

EasyOne

 are registered trademarks of 

ndd Medizintechnik AG.

Bluetooth

®

 is a registered trademark of Bluetooth SIG, Inc.

PCL

®

 is a registered trademark of Hewlett-Packard Development Company, L.P.

Wi-Fi

®

 is a registered trademark of Wi-Fi Alliance.

Microsoft

 and 

Windows

 are either registered trademarks or trademarks of 

Microsoft Corporation

 in the United States and/or other countries.

Содержание EasyOne

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды