NDC BenchMike Pro 2025, Инструкция по эксплуатации

Страница: 90 / 160

4-28 BenchMike Pro Instruction Handbook: Setup
4.11 Measurement Functions
By selecting the Measurement option, you can define ex-
pressions, settings for fixtures, measurement types, nomi-
nal/limit/tolerance settings, the floating nominal value, and a
user master value. When multiple Features exist, measure-
ment settings are unique to each.
NOTE: Measurement commands are unique to each feature
within each library.
4.11.1 Expression Editor
You can define equations or desired calculations with the Ex-
pression Editor . The default expressions for all predefined
measurement types cannot be changed.
4.11.2 Fixtures Menu
The Control menu allows you to access the Fixture Meas-
urement Setup page.
From Fixture 1 and Fixture 2 , you can control fixture meas-
urement settings and access settings for different fixtures.
When you select Control , the Fixture Measurement Setup
menu appears. Use the Use Fixture to Collect Data entry to define how the fixture behaves during measure-
ment. Note that this item is enabled if at least one attached
fixture is motorized. The fixture used to collect data is the
primary fixture for obtaining readings.
If a motorized fixture is being used, you can choose to have
the BenchMike Pro take measurements automatically (ac-
cording to your Position and Motion values), manually, or con-
tinuously. Non-motorized fixtures only support the manual
mode.