ND SatCom SKYWAN IDU 1070 Скачать руководство пользователя | Manualshive

Страница: 59 / 154

background image

2010-10-26

Network Design and Engineering Guide

55

General Carrier Design

TDMA Carrier Design with ’TDMA Calculator’

2.6

TDMA Carrier Design with ’TDMA Calculator’

As outlined in the previous section, the calculation of the required frequency bandwidth of

Sky-

WAN

®

carriers for an estimated user data rate must take into account

-

the contributions of the satellite link layer,

-

the modulation scheme,

-

the modem overhead.

The ’ND SatCom Products GmbH TDMA Calculator’ is a java based tool, which calculates for
each carrier the user data rate and frequency bandwidth, based on the given modem data rate
from the network capacity calculation.
Two versions of the tool are available: a stand-alone version and a tool, which is invoked from
the ’

Sky

NMS Network Configurator’. Both versions have the same GUI and functionality; there-

fore only specifics and differences are pointed out explicitely.
-

stand-alone ’ND SatCom Products GmbH TDMA Calculator’: open application by double-
click on desktop icon or via ’Start -> Programs -> ND SatCom Products GmbH -> TDMA
Calculator -> ND SatComs Products GmbH TDMA Calculator’. The calculated output pa-
rameter can be exported and copied into the relevant configuration profile parameter. A
menu bar is available for exiting the application, export and import to/from a file and to show
via ? and About entry the toolrelease version. A status line is provided, where output mes-
sages are displayed.
The stand-alone version is a software application that does not need a login.

-

’TDMA Calculator’ as tool integrated in the ’

Sky

NMS Network Configurator’ application. In

Sky

NMS the tool is invoked in the following way: in

Sky

NMS menu ’Network Configuration’

select the entry ’

Sky

NMS Network Configurator’. Browse in the configuration tree to the ap-

propriate network group and profile. In the mouse context menu select entry ’Open TDMA
Calculator’. The integrated tool version allows for transfering the calculated output data into
the corresponding profile parameter with a mouse click.
In the

Sky

NMS integrated TDMA Calculator (error) messages are displayed in the ’Output’

window and the statusline of the ’

Sky

NMS Network Configurator’. Arrange the windows in

such a way, that the ’

Sky

NMS Network Configurator’ messages (in the background) are

visible for you.
Running the ’TDMA Calculator’ from the Network Configurator is only possible with the
user right ’Full Access’. In other cases, the execution is not permitted.

Figure 2-38

Start integrated SkyNMS TDMA Calculator

«
...
57
58
59
60
61
...
»

Содержание SKYWAN IDU 1070



























































































































































Отзывы:

Нет отзывов

Похожие инструкции для SKYWAN IDU 1070

DU-562M - 56 Kbps Fax

Бренд: D-Link Страницы: 31

Бренд: FALCOM Страницы: 46

Бренд: Radyne Страницы: 306

Бренд: Patton electronics Страницы: 13

Бренд: Palm Страницы: 20

Бренд: C-motech Страницы: 15

Бренд: Bausch Datacom Страницы: 50

Бренд: NETGEAR Страницы: 2

302352/20170405SZ147

Бренд: APLIC Страницы: 28

Бренд: Hughes Страницы: 138

Бренд: Embedded Communications Systems Страницы: 43

DM111PSP - ADSL2+ Ethernet Modem

Бренд: NETGEAR Страницы: 2

Ins-60007-gd-us

Бренд: Paxton Страницы: 8

Бренд: RIM Страницы: 76

Бренд: Accelerated Страницы: 2

Бренд: Dataradio Страницы: 73

Бренд: Campbell Страницы: 74

Бренд: Ebyte Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды