NCT SC-32, Руководство по эксплуатации

Страница: 13 / 20

SC-32
CNC LATHE
OPERATING MANUAL
NCT Ipari Elektronikai Kft
. 13 / 29 Dátum: 2013.09.27.
1148 Budapest, Fogarasi út 7.
Tel.: 06-1-467-6300
www.nct.hu
ƒ Levelling adjustment:
To keep the accuracy and to maintain the good condition of lifetime of this machine,
levelling adjustment is one of the important factors. Please carry out leveling by adjusting the
leveling bolts at the bottom of machine base after installation.
Please use accurate level 150 mm length with a minimum scale of 0.02 mm on the
worktable, and then turning the leveling bolts to make the deviation within 0.02 mm/M.
3.9.2. Oil requirement
Check point Supplied way Assigned oil Qty Using time
1 Spindle Daub by hand Grease - -
2
X/Z-axis
linear guide way
Supply by lubricator Slide way oil G68 2 l
3
X/Z-axis
ball screw
Supply by lubricator Slide way oil G68 2 l
When
lubricant
warning light
is on.
4 Milling device Supply by lubricator Slide way oil G68 2 l -
5 Chuck Daub by hand Normal use oil Proper -
6 Hydraulic system Inspect visibly
Hydraulic oil 32#
(FINA)
20 l
Replace once
after first
month; then
replace once
every 6 month
7 Coolant Inspect visibly
Cutting fluid SP-
M22
200 l -
8 Lubricant Inspect visibly
Slide way oil G68
(FINA)
2 l -