NCR SelfServ XK22, Руководство по подготовке площадки

Страница: 19 / 53

NCR SelfServ™ XK22 (2246) Site Preparation Guide 9
Data Line Transient Protection
The nature of the transient phenomenon may extend to the data communication lines
connected to this equipment. It is the responsibility of the customer to install and
connect a data line transient suppression system to correct or prevent any deficiencies.
Such systems must meet the following minimum requirements:
• Be of the voltage limiting type and must self-recover after passage of the transient.
• Must be designed to avoid signal degradation for the given interface they are
attached to.
• Be installed in accordance with all applicable local, state, and national electrical codes
and regulation.
Note: NCR provides a full line of both AC power and data line transient surge
suppressors to protect your NCR unit and reduce downtime and extend the life of the
NCR TouchPort travel solution. For sizing and product information, please call NCR Site
Preparation Services at 800-257-0458.
The following product offerings are available from NCR Site Preparation Services:
• UPS – Uninterruptible Power Systems
• Provides battery backup for power outages and brownouts.
• Includes AC and data line surge protections.
• If needed, certain models provide basic voltage regulation.
• Small size provides easy installation.
• Line Conditioners / Filters
• Incorporates an Isolation transformer or filter that provides 100% isolation from
disturbances on the incoming AC power line.
• Removes EMI/RFI noise that causes equipment lockups.
• Reduces common mode noise issues and surges/transients.
• Significantly reduces POS downtime and component failure.
• Transient Voltage Surge Suppressors
• Provides protection from catastrophic AC surges/transients.
• Provides data line protection from catastrophic surges that can migrate onto the
data line and network.