NCR RealPOS 70, Руководство пользователя

Страница: 270 / 306

13-2 Chapter 13: Wedge to USB MSR Software Migration
Software Requirements
The software that supports the USB MSR is available in the Retail
Platform Software for Windows (RPSW), version 1.3.0 (or later).
Setting up the software to support the USB MSR requires two
components. The first is to have the OPOS Service Object and
supporting DLL installed on the system, and the second is to have the
OPOS Profile configured properly to use this software.
1. OPOS Service Object and Supporting DLL
•
Service Object:
NCRMSR.DLL
•
Supporting file:
NCRHID_DLL.DLL
2. The OPOS Profile must have the following properly configured:
•
Programmatic ID:
NCRFitClient.MSR
•
MSR Interface:
USB
RPSW versions 1.5.2 (and above) installs the correct DLLs onto the
system when default installation options are chosen, but they do not
create a default profile that uses the
MSR
. RSPW versions 1.5.2 (and
later) does create a default profile (
NCRMSR.2
) that uses the
NCRFitClient.MSR.
However, the MSR Interface is set to Integrated .
Changing this to USB creates a profile that works with the 7402 USB
MSR.
For RPSW versions before 1.5.2 the DLLs required to use the USB MSR
are not installed by default configuration selections. In order to use
these versions with the USB MSR a modified installation must be
performed. The NCR5932 Service Object feature must be added when
performing the installation. A default profile (
NCRMSR.3
) is created
and properly configured during installation to use the USB MSR.