NCR PX10 POS 7746, Руководство пользователя

Страница: 22 / 82

Controlled Deployment
2-12 Hardware Installation
Installation Notes
Cable Restraint
The NCR PX10 POS (7746) includes cable management features to prevent accidental
disconnects and tampering. Some connectors include locking mechanisms and cables
that can be routed through the slot in the base.
Footprint
An area of no less than 45 square inches is necessary to properly install a PX10 unit with
MSR. This will accommodate the unit as well as its associated mounting hardware. For
terminals with customer display, refer to the
NCR PX10 POS (7746) Site Preparation
Guide (BCC5-0000-5288) for specific dimensions.
Power
The NCR PX10 POS (7746) includes a 12V power supply as standard. With the powered
USB 24V option, a 24V external power brick is used. The source power of the PX10 is
drawn from a regular AC wall outlet. The electronics are “universal” – that is, they will
function when connected to standard wall outlets in most countries around the world.
For use in locales other than North America, special wall outlet adapters or cables will be
required. For international configurations, the country-specific power cord is ordered
separately.
Moisture
The terminal should not be installed in areas where it might be exposed to direct water
spray. PX10 units are not meant for outdoor installation.
Touch Screen Cleaning
Use water or a standard glass cleaner (non–ammonia) with soft microfiber cloth to clean
the touch screen. Spray onto cloth first before wiping the screen to prevent liquid from
running down the glass and onto the bezel.
Chemicals or solvents to avoid:
• Alcohol–based agents
• Ammonia
• Bleaching agents
• De–greasing agents
• Sanitizing agents