Confidential and proprietary information of NCR.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
21
Configuring the Camera Settings
Before configuring the camera settings, do the following:
A. Obtain the IP address settings of the removed camera. This will be used to
set the IP address of the new Camera. For more information, contact an
NCR Representative or the Retailer's Help Desk.
Note
For new camera installation, IP Addresses are pre-allocated by the
Retailer's IT Team.
B. Install the Tri-Light/Lane Light with Camera Assembly, if necessary.
To configure the Camera Settings, refer to either of the following procedures:
l
Configuring the Camera Settings using SADP Tool on the next page
l
Configuring the Camera Settings using Batch Configuration Tool on
page 30
Note
Configure the camera settings using Batch Configuration Tool if the
IP address of the camera is static.
