Citrix Ready workspace hub by NComputing (RX-HDX)
9
Session roaming with proximity
authentication
After the configuration is complete and Citrix Receiver is launched, the session will roam to the Citrix
Ready workspace hub when the device enters the proximity authentication range of the hub.
If multiple hubs are within range, the following
dialog appears to let you select your hub of
choice to roam your session.
If multiple Citrix Ready workspace hubs are within
range and Citrix Receiver is running in the
background, a notification appears on your
mobile device.
Click the notification.
With proximity authentication, there are four ways to exit a session:
•
Move your mobile device out of Range 1 and 2.
•
Use two fingers to swipe down on the Citrix Receiver main interface.
•
Close Citrix Receiver.
