6
a
Register your MX100S 3-user kit
6
b
Register and activate your vSpace
®
Server
Go to www.ncomputing.com/MX100/register to register
your new NComputing MX100S 3-User Kit and learn
about the benefits that come with registering your new
product.
© Copyright 2016 NComputing Co., Ltd. All rights reserved.
Other trademarks and trade names are the property of their respective owners.
Part No. 162-0053 Rev.A
MX100S
(MX100-Primary / MX100-Satellite)
3-User Kit/Standard Edition
Quick installation guide
Note:
Read the vSpace End-user License Agreement during installation for
Microsoft operating system licensing requirements. For multiuser
applications Microsoft Windows Server and client access licenses are
required (see: www.ncomputing.com/mslicensing).
MX100-Primary / MX100-Satellite
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note
: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
4
c
Connect MX100 devices
USB cables must be connected as illustrated below.
USB Direct Connect
Icon
Cable Type
A/B USB 2.0
Maximum Distance 5 Meters
1.
Connect the RJ45 port on the main (large)
unit to LAN or Ethernet switch (should be
on 1Gb LAN) using Cat 5e or Cat 6 cable
(maximum length 100m).
2.
Connect two small clients to sides of large
client using the included 2m A/B USB cables
(USB 5 meter limit)
desktop virtualization software
5
Configure MX100 devices
Note:
To return to this set up screen,
log out of all MX100-Satellite
devices and press
F5
at the
NComputing splash screen.
1.
Configure "Connection Settings."
A.
Autoconnect (optional - connect to
preset host/group) or
B.
Select from list (default - user selects
host/group from list).
2.
Configure "Login Settings."
Select resolution and color depth.
Must register within 30 days
