24
DISPLAY
Low battery flash
6.1.1 Battery Residual Capacity Indicator
The battery capacity indicator has five segments, each segment representing 20% of battery capacity. When the battery
is full, the five segments are all lit. If the battery is low, the battery display area will flash, indicating that pedal
assistance will soon cease and that the battery needs to be recharged.
6.1.2 Battery Voltage
The present voltage of the battery is displayed above the battery capacity indicator.
6.2 POWER SAVING
When the riding speed is 0km/h for 5minutes, the system will power off automatically to save battery.
Section 7:
USB CHARGING
Connect the charger of your electronic device to the USB port. Simultaneously press the "SET" and the "+" for two
seconds to start charging. Simultaneously press and hold "SET" and "+" for two seconds to stop charging.
Definition
Normal
Current error or MOS (semiconductor) damaged
Throttle error (detection after turning on)
Motor missing phase (losing power)
Hall signal error (electromagnet in incorrect position)
Brake error (detection after turning on)
Under voltage
Motor stalling
Error in communication with controller
Error in communication with display
Error code
0
1
2
3
4
5
6
7
8
9
5.3 ERROR CODE TABLE
Each error code corresponds to a specific fault in the system. Take the E-bike to your dealer to have the error resolved.
If you still have some questions about the display, please contact your NCM dealer.