www.nc-link.cn
1
How to configure 3-Step Quick Connection of NC-LINK
Outdoor CPE in WDS mode
For NC-AP211 & NC-AP212
1.
Interface Instruction:
LAN:
10/100Mbps RJ45 port, can support 24V Passive PoE.
WAN:
10/100Mbps RJ45 port, can support 24V Passive PoE, but it changes to LAN port under
WDS, Repeater and AP operation mode
Reset:
Reset Button, press 10~15 seconds, outdoor CPE will revert to default settings.
DC:
12V/1A DC input injector.
F(fn):
Mean Function, can select the CPE’s channel and master or slave mode.
S:
Mean Selection, can select the functions or view CPE’s Channel, IP address and Signal strength
status.
LED Display:
Show the status of Channel, IP Address, Master or Client, RF Power.
LED Display Content
Content Instruction
Remark
H: Hotspot, WDS mode, Master AP
149: Channel is 149
Show the channel of Master and Slave AP;
Pls note, the channel should be same with
Master and Slave AP.
If not operate this LED display in 10 mins,
the screen will be automatically black
screen
C: Client, WDS Mode, Slave AP
149: Channel is 149
A: IP Address
253: IP address is 192.168.188.253
Show Master and Slave AP’s IP address;
Remark:
In Master and Slave APs, there is one
device with IP address: 192.168.188.253;
Other device with IP of 192.168.188.X, to
avoid the IP address conflict.,
P: RF Power
-42: The signal Strength is -42dBm
The signal strength is different if distance
different.