NBE Scotte 16kw, Инструкция по установке и эксплуатации, Страница: 12 / 22

Section 6
Cleaning the burner.
Switch off the control system by pressing the DOWN button for 5 seconds.
Wait for approximately 5 minutes to allow the burner to cool down. When it
has cooled down completely it is ready for cleaning. Take the connector off
the burner, remove the shield and down pipe, and unscrew the burner unit off
the boiler. The parts can now be worked with for cleaning.
To ensure best boiler operation,
cleaning should be done frequently.
This guarantees the best fuel
efficiency. The better the boiler is
set up the longer the intervals
between cleaning.
The boiler …..
The boiler should be emptied from
ash and all of the surfaces should be
brushed in order to remove soot
particles. Pay particular attention to
ash in the exhaust deflector and the
flue pipe. The flue pipe does NOT
clean itself. You must do this yourself.
An old vacuum cleaner is the best
method for this.
The burner head …..
Remove the ash and any cinders from the unit.
Remove any pellet remains under the unit. Dry off the flame indicator.
Ensure that there is nothing in the blower.
Starting up after cleaning ….
Reassemble the burner and fit into boiler. Start the boiler by pressing the
DOWN button for 5 seconds and the system will start itself. Remember to put
the shield back into place so that the burner temperature will be measured
correctly.
Page 11