Getting Started with MAXserver Access Servers
0038
131
Write down the numbers of the error code (the lights that are ON) and
contact your NBase-Xyplex Customer Support representative. (In the U.S.,
call 1-800-435-7997. For International calls, the number is 978-952-4888).
Your representative will provide further instructions on how to handle the
condition.
Common Error Codes
First Error Code:
3, 4, 6, 7
Second Error Code:
3
Problem: The MAXserver has been configured for more memory than is
actually installed.
Solution: Either configure the MAXserver for less installed memory, using
the Access server Configuration menu, or install additional SIMM memory.
(The SIMM memory installation should only be performed by qualified
personnel.) Use the Modify Unit Configuration option to specify the amount
of installed memory. The Configuration menu is described in Chapter 4.
First Error Code:
3, 4, 8
Second Error Code:
2, 8
or
First Error Code:
3, 4, 6, 7
Second Error Code:
3, 6
Problem: Reinitialize the unit.
Solution: Select the Modify Unit Configuration option from the
Configuration menu (see Figure 28) to access and modify configuration
parameters, or you can reinitialize the unit from Command Line Interface
with the following command:
