Naxer
Tech
Limited
14 |
P a g e
D.
Administrative Commands:
Admin Commands offer such commands to be sent to the tracking unit to clear all the settings, reset it and install a new version of
firmware when available. These commands are only for the Administrative purposes only. Let’s discuss each Setup command in
detail:
Format
%CLR
%CLR
When the unit receives the command, it will clear all the settings from the EPROM which
includes configuration settings, Odometer and all the stored locations.
%CLR,0 will only erase configuration settings.
Unit Response:
Cleared Unit Settings.
Format
%RST
%RST
When the unit receives the command, it will restart itself.
Example
-
Format
%UPGRADE
%UPGRADE
When the unit receives the command, it allows the device to access and download the
firmware from its Base Station.
Example
-
