Naxer
Tech
Limited
11 |
P a g e
C.
Setup Commands:
Setup Commands offer such commands to be sent to the tracking unit to set the parameters for the features that the tracking unit
offers. Let’s discuss each Setup command in detail:
Format
%GEO,0
%GEO,0
When the unit receives the command, it will disable all the geo fence settings applied to it and
will send a confirmation SMS text format to the number which sent the command.
(Only for
authorized numbers)
Example
Geo Fence disabled.
Format
%IDLERUN,x (seconds),x (metres)
%IDLERUN,x,x
Alert triggers if ignition is ON for more than the time duration specified and vehicle does not
move more than the specified distance. In below example, if ignition remain on for 10 minutes
within 50 metres device will trigger IDLERUN alert
Example
%IDLERUN,600,50
Format
%MINDISTANCE,50
%MINDISTANCE,50
When the unit receives the command, if the vehicle moves more than 50 metres from last
position the unit will send its locations as per the time interval settings set under TRACK
command. But if the unit remains under 50 metres, it will send its location after every
stationary time period specified. Value could be any number denoting metres.
Example
-
Format
%MINDISTANCE,0
%MINDISTANCE,0
When the unit receives the command, it will disable the MINDISTANCE command and will send
its locations as per the settings applied under TRACK command.
Example
-
Format
%ANMED,1
%ANMED,1
When the unit receives the command, it will turn on the Analog Median calculations and will
send a confirmation SMS text format to the number which sent the command. In Median mode,
fast oscillations in analog input are smoothed.
Example
-
Format
%ANMED,0
%ANMED,0
When the unit receives the command, it will turn off the Analog Median calculations and will
send a confirmation SMS text format to the number which sent the command.
Example
-
Format
%GPRS,0
%GPRS,0
When the unit receives the command, it will send the data SMS if GPRS connection cannot be
established at all occasions.
Example
-
Format
%GPRS,1
%GPRS,1
When the unit receives the command, it will send the data only through GPRS. SMS fallback will
only be used in case of alarms.
Example
-
Format
%GPRS,2
%GPRS,2
When the unit receives the command, it will send Alert SMS only to Control Centre and
Contacts if GPRS connection cannot be established at all occasions.
Example
-
