Navvis VLX Скачать руководство пользователя страница 127

Страница: 127 / 194

Scanning with Contr

Scanning with Control P

ol Points

oints



NOTE:

The scanner can use a control point more than once within a dataset if it is passed

multiple times during scanning.



NOTE:

If the control point is not saved within 60 seconds it must be set again.

Adding Control Points

Using control points while scanning is not a requirement, but using control points can:

▪

Automatically register the scans with other scans

▪

Verify the results for accuracy

▪

Optimize accuracy at very long corridors where loop closures are not possible



NOTE:

Take at least three control points per dataset



NOTE:

To increase the quality of the datasets, use more control points. Note that there are

no benefits if control points are closer than 25m to each other.

To add a control point while scanning:

1. Select the control point button

from the right menu on the user interface.

2. From the Na

NavVis VLX siz

vVis VLX sizee screen, select the size of your belt settings. Tap Next

Next.

NavVis VLX

vVis VLX

User Guide

125

Содержание VLX



































































































































































































Результаты поиска

Содержание VLX

Отзывы:

Navvis VLX, Руководство пользователя, Страница: 127 / 194

Результаты поиска

Содержание VLX

Отзывы: