Navvis VLX, Руководство пользователя, Страница: 123 / 194

Placing Contr Placing Control P ol Points oints
A control point is a specific point on the floor or wall of the site. It has to be marked clearly and
assigned a unique identifier.
The following are recommendations for control points:
▪
Distribute control points evenly. Place them more than 5m apart from one another and, if
possible, not in a straight line.
▪
Place control points at the beginning and end of each dataset.
▪
Include at least three control points per dataset.
▪
For automatic alignment without measured control points, neighboring datasets must have
at least two control points in common in order to align the datasets to each other.
▪
To improve map accuracy, place control points in corners, at the ends of corridors, and
measure them. Place one control point at every corner of a long corridor. Details depend on
the building layout.
▪
Ground control points should be placed at least 50 cm from corners. One control point
every 25m. Wall control points should be 160-180 cm high.
There is no fixed rule for how many control points to use within a dataset. It depends on the
building layout and use case.
Measured Control Points: Improved Absolute Accuracy
When using measured control points to improve the absolute accuracy of the trajectory
estimate, effective placement depends on the building layout. It is a trade-off between how
accurate the mapping results need to be and the time spent on placing and measuring the
control points.
In this type of building layout, we advise placing control points every 25 meters of the device's
trajectory, at every corner and the ends of corridors, for high map and point cloud accuracy.
Na NavVis VLX vVis VLX
User Guide User Guide 121 121