Step 1
Begin by removing the shift knob on manual transmission
equipped vehicles or the shifter trim bezel on an automatic
car.
Step 2
Open the center console. Pull up on the back of the center
console trim to remove.
Step 3
Unplug all electrical connections. This includes the connec-
tion on the front left of the panel and the connection on the
right side of the panel if applicable.
Step 5
Unplug the HVAC connector on the bottom right of the
panel, remove the panel from the vehicle. Remove the (6)
White clips from the panel and transfer them to the Navos
panel. Store the factory dash panel in a safe location. This
will not be reused.
Step 4
Remove the (2) 8mm screws securing the dash trim panel to
the vehicle. Then using a soft pry tool, gently pull the panel
from the dash board. **Note: Steps 4-6 will be slightly
different but very similar for vehicles with factory navigation.
Step 6
Remove the (4) 8mm screws that secure the upper display (A)
to the vehicle. Disconnect and remove the display. Next,
remove the (4) 8mm screws that secure the CD player (B) to
the vehicle. Disconnect the (2) plugs and (1) antenna **Note:
pull on the antenna from the black metal collar, pulling the
cable can cause damage to the antenna. Place A and B with
the dash panel removed in step (5)
2010-2014 OE Style Touch
Screen Navigation
A
A
B
