Navistar WorkStar Series, Руководство оператора

Страница: 206 / 258

Maintenance Instructions
Power Steering
Whenever the power steering system has been drained and
refilled for any reason, air must be bled from the system before
returning the vehicle to service. Failure to properly bleed the
hydraulic system can result in degradation of power system
performance.
Consult your International dealer for proper procedures of filling
and bleeding the system.
The power steering fluid filter is located inside the power steering
reservoir. To remove the filter, unscrew the large cap on the
power steering reservoir and unscrew the filter. Reverse the
procedure to install the new filter.
Refer to SECTION 7 — MAINTENANCE INTERVALS AND
SPECIFICATIONS for the fluid and filter replacement intervals.
Tires
Tire Warnings
WARNING
Due to tire manufacturers re-marking tires to
conform to the SI (metric) system, tires marked
with old and new loads or inflation pressures
could be placed on the same vehicle. For field
maintenance, only inflate and load tires to the
maximum of the least-rated tire on the axle.
Failure to adhere to this warning could possibly
result in tire malfunction, damage to your vehicle,
personal injury, or death.
WARNING
Always maintain your tires in good condition.
Frequently check and maintain correct inflation
pressures as specified by tire manufacturers.
Inspect periodically for abnormal wear patterns
and repair/replace cut or broken tire casing.
Always use experienced, trained personnel with
proper equipment and correct procedures to
mount or remove tires and wheels.
Failure to
adhere to these warnings could result in wheel
or tire malfunction, damage to your vehicle,
personal injury, or death.
194
3879634R1