Navistar ProStar+, Руководство по эксплуатации и обслуживанию, Страница: 99 / 304

Controls / Features
Gauges
There are four spaces for optional gauges in the instrument
panel gauge cluster of the center instrument panel. There are
five optional gauges to choose from. All gauges are used for
helping monitor the vehicle while in service.
Item Description
Provides reading of brake application air
pressure in pounds per square inch (PSI).
Provides monitoring of temperature of
forward-rear axle lubricant in degrees
Fahrenheit (°F).
Provides monitoring of temperature of
rear-rear axle lubricant in degrees Fahrenheit
(°F).
Provides reading of turbocharger boost
pressure in pounds per square inch (PSI).
Optional on vehicles equipped with Selective
Catalytic Reduction (SCR) system.
Provides reading of transmission lubricant
temperature in degrees Fahrenheit (°F).
Switches
Up to 23 optional switches can be located in the center and
lower right side of the center instrument panel. Location of these
switches will vary depending on the options installed. Blank
cover plates will be used in spaces that do not have switches
installed at those locations.
Item No. Item Description
5 MIR HEAT / ON
A momentary switch
that, when pushed and
released, turns the mirror
heating element ON / OFF.
6 SLPR TEMP
Controls the temperature in
the sleeper compartment.
7 SLPR FAN
Controls the on / off and fan
speed of the temperature
control in the sleeper
compartment.
8 ENG BRAKE 1/2/3
A three position switch
that selects the amount of
engine braking (1 = Low, 2
= Medium, 3 = High)
87