Navistar ProStar+, Руководство по эксплуатации и обслуживанию, Страница: 59 / 304

Controls / Features
SECTION 4 — CONTROLS / FEATURES
Introduction
General Information
The controls / features enable the driver to monitor and manage
the operation of the majority of the vehicle's functions. This
section describes and identifies various components within the
Overhead Console, Instrument Panel Gauge Cluster, Center
Dash Panel / Wing Panel, Steering Column and Switches,
Steering Wheel Controls, Door and Window Controls, Collision
Warning / Safety Systems, and Electronic Touchscreen.
Electrical
WARNING
To prevent property damage, personal injury, and
/ or death, this vehicle may be equipped from
the factory with electrical switches intended to
operate equipment that was installed by a Truck
Equipment Manufacturer (TEM). Instructions,
Cautions,
and Warnings for this additional
equipment will NOT be found in this manual.
Read and understand the appropriate manual
for the specific equipment in question before
operating.
NOTE: This vehicle may be equipped with electronic,
application-specific options not described in this operator’s
manual. Many of these features are supplied with rocker
switches that have custom labels applied. The presence of
these options as factory installed can be verified from the
Line Set Ticket included with the vehicle. A TEM, however,
may have installed some of these options after production.
In that case, they will not appear on the Line Set Ticket.
If installed by a TEM, you should receive an operating
guide and / or training for the specific functions provided.
Familiarize yourself with all of the switches that control
chassis, engine, and body equipment and seek adequate
training on the function of all features before operating this
vehicle.
Electrical System
The Electrical System provides a means to distribute the
electrical power and provide the driver with controls and
indications of vehicle performance. Unlike previous electrical
systems, this system uses multiplexing for connecting to major
functional areas of the truck with much less wiring. The system
is controlled by the Body Controller, which provides interfaces to
a majority of vehicle switches and sensors. The Body Controller
also communicates with the standard and optional system
controllers and modules in the vehicle.
47