System Hardware Configuration
Figure 2.11: Arrow Buttons
Figure 2.12: Rotary Knob
Heading Control
The vessel heading is controlled with a rotary knob.
When Manual Heading control mode is selected, the knob is used for generating the control moment in the yaw axis,
which is proportional to the angle of the knob rotation.
2.4.13
ALARM ACK
The ALARM ACK button is used to acknowledge incoming alarm messages that are displayed in the
Alarm Window (and on the Last Alarm/Message line) (see Fig 2.13). In case of the unacknowledged alarms the button is
red-blinked.
When holding the button the Silence mode is on (in case at least one alarm to acknowledge is in list).
In the Silence mode the button is red non-blinking if unaknowledged alarms are in list.
2.4.14
ENTER
The ENTER pushbutton is used to acknowledge operations via the control panel. The ENTER softkey
on the LCD serves the same function.
This button approves only the actions performed via the control panel, the main DP display (Visual) operations are
unavailable for the control panel’s Enter pushbutton.
2.4.15
CANCEL
The CANCEL button performs cancellation function, e.g. in case of wrong input.
Keep in mind that the only control panel operations can be cancelled.
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
30
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
