Navico B&G V100 Скачать руководство пользователя

Страница: 42 / 87

Fog Horn, Intercom, and Hailer

Note:

An appropriate Hailer speaker must be connected to the Hailer wiring before the HAILER or FOG

HORN functions can be used.

Using the FOG Horn

The FOG horn will sound certain international standard fog horn tones through the Hailer speaker
depending on the mode selected.

Long press the

AIS/IC

key to enter IC/HAILER mode:

Select FOG HORN and press the

key.

There are 8 choices of internationally recognized fog horn sounds and timing:

Type of Fog Horn

Tone

Occurence

HORN

Horn tone

Manual operation

UNDERWAY

1 long tone

Automatically every 2 minutes

STOP

2 long tones

Automatically every 2 minutes

SAIL

1 long, 2 short tones

Automatically every 2 minutes

ANCHOR

1 long warble

Automatically every 2 minutes

TOW

1 long, 3 short tones

Automatically every 2 minutes

AGROUND

Warble sequence

Automatically every 2 minutes

SIREN

Siren tone

Manual operation

Scroll through the menu to select a fog horn type, then press OK to start the selected fog horn sounding.

All except HORN and SIREN will sound automatically.

The fog horn will sound automatically approximately every two minutes until you press X to cancel it.

When the fog horn is not sounding, it is in LISTEN mode.

To operate HORN or SIREN, once selected, press and hold the OK key on the handset, or the dedicated

Horn Key wired into the blackbox. This will sound as long as the key is pressed. You can then also operate
PTT to talk through the Hailer.

To change the volume, operate the volume keys to change the volume while sounding.

Press X to return to normal radio operation mode

Using the INTERCOM (IC)

Intercom mode allows you to talk directly other handsets in the system. You can choose to talk to All
installed handsets, a pr

econfigur

ed group of handsets or select individual handsets.

Note:

The Intercom mode works only when more than one FHS or WHS are installed.

Note:

In this mode, Long Press a corresponding Numeric key on a Wired Handset to talk directly to

that station.

Long press the

AIS/IC

key and select INTERCOM.

Select the station to talk to.

Press the

PTT

key to talk to the handsets. Release the

PTT

key to hear a reply.

Press the

key to quit the INTERCOM mode.

42 |

Fog Horn, Intercom, and Hailer |

RS100 / RS100-B / V100 / V100-B User Manual

Содержание B&G V100
























































































Результаты поиска

Содержание B&G V100

Отзывы:

Похожие инструкции для B&G V100

Бренды по названию

Популярные бренды

Navico B&G V100, Руководство пользователя

Результаты поиска

Содержание B&G V100

Отзывы:

Похожие инструкции для B&G V100

Бренды по названию

Популярные бренды