32
6. Instructions
6.1 Start
Hold the power button 1sec
，
the length of time required to acquire a GPS fix after starting
this device may vary:
Normal
Approx. 2 minutes
Approx. 15~45
sec.
A. First use after purchase (may need to update
satellite information).
B. Frequent use in Taiwan.
Special
Approx. 5 minutes
A. Device has not been used for over 3 months.
B. You are over 800km away from the location where
you last used this device.
Blinking icon means no fix or scanning. A constantly lit icon means fix acquired or
being acquired. When there is no GPS fix, time is displayed as --:--:--, distance as ---- and
speed as ---.
6.2 Bike Mode
This is the default mode upon startup. There are three main modes, these being Bike
,
Waypoint
and Route
. Pressing on the "Power/Mode" button cycles
between Bike, WayPoint and Route modes.
1. By default, the device starts in
mode. The first page shows the following items:
(1) Current riding time, shown as Time.
(2) Total cumulative distance ridden, shown as ODO in
MI or KM.
(3) Current speed, shown as mi/h or km/h.
(4) Arrow pointing north.
