BHM
04/16/14
NTV-DOC175
rB2
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
5 |
P a g e
4.
Connect the factory 44-pin plug to the female end of the provided
Plug & Play T-Harness
and lock it into place.
5.
Connect one of the newly made fiber optic pairs (from step 3) to
the male side of the provided
Plug & Play T-Harness
at the
proper port (it is keyed and will only connect in one direction).
6.
If there is a mini plug (usually green) located on the factory 44-
pin harness, it must be removed and re-inserted into the male side
of the provided
Plug & Play T-Harness
at the proper port.
7.
Connect the last free fiber optic pair back into
the provided
fiber connector.
Connect this fiber
connector to the port on the
SIR-PCM3
interface labeled ‘MOST’ (remove dust cover
first).
8.
UPDATE:
On the 8-pin Molex harness that will connect
to the provided
PCM3 Filter
(in step 8), locate the
Red
wire
:
a.
Cut this wire in half.
b.
Connect the plug-side of this
Red
wire to a
12v
ACC SOURCE
(if you purchased a NAV-TV S2P
with the PCM3 kit, connect the 12v ACC output
to this wire)
.
c.
Insulate the other side of the cut
Red wire
.
9.
Connect the provided
PCM3 Filter
to the 8-pin Molex plug located on
the
Plug & Play T-Harness
.
Supply 12v ACC to this wire
