Nautilus Glute Drive Скачать руководство пользователя страница 3

Page 2

Before using this product, it is essential to read the ENTIRE Owner’s Manual and ALL 
installation instructions. The Owner’s Manual describes equipment setup and instructs 
members on how to use correctly and safely.

Read all warnings posted on the machine.

Health related injuries may result from incorrect or excessive use of exercise equipment. 
Core Health & Fitness strongly recommends you to encourage your members to discuss their 
health program or fitness regimen with a health care professional, especially if you or they 
have not exercised for several years, are over 35, or have known health conditions.

WARNING!

IMPORTANT SAFETY INSTRUCTIONS

 WARNING - to reduce the risk of injury to 

person:

24 in (0.6 m)

36 in (0.91 m)

Fig. 1

 Required Clearance

1. 

Assemble and operate the machine on a solid 
level surface. Position the machine with a 
minimum of 24 inches (0.6 meters) of clearance 
on each side to allow for ease of mounting and 
dismounting. Allow for 48 inches (1.25 meters) of 
clearance behind the machine. Leave a minimum 
of 19.7 inches (0.5 meters) between two adjacent 
units. These dimensions are the recommended 
minimum distances.  
 
The actual area for access and passage shall be 
the responsibility of the facility and should take 
into account this training envelope, Americans 
with Disabilities Act Accessibility Guidelines 
(ADAAG) requirements and any required local 
codes or regulations (www.access-board.gov/
ada).

2. 

Do not exceed the maximum allowable weight 
limit of:

•  350 lbs. (160 kg.)

3. 

All equipment MUST be secured (bolted and 
tightened) to a solid, level surface, using all of 
the anchoring holes provided, to stabilize and 
eliminate rocking or tipping over. Shim any 
mounting surface that does not rest thoroughly 
on the floor using flat washers, DO NOT force the 
foot to contact the ground with anchors. 
 
Fasteners must have a minimum of 500 lbs. 
tensile capacity, be a bolt of grade 2 or better 
and be installed per the bolt manufacturer’s 
specifications. 
 

 

WARNING:

 Due to the wide variety of flooring 

on which equipment may be anchored or installed 
and differences in applicable local building codes, 
Core Health & Fitness is not responsible for any 
damage to the flooring that may result due to 
anchoring or installing equipment to the floor and 
for compliance with local building codes. Only 
licensed contractors or certified installers should 
be used to insure proper anchoring, installation, 
and compliance with local building code.

4. 

This equipment is designed for use in a 
commercial gymnasium or health club. To ensure 
the proper use of the equipment in a safe manner, 
all users of the equipment should read this 
manual before using the machine. This machine 
should be made a part of your club training 
program in order that the equipment is used by 

Содержание Glute Drive

















Отзывы: