Nautilus Hyosung MX8200QT, Руководство оператора

Страница: 6 / 121

Chapter1. Preface Operator Manual
1-2 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Conventions
▶
Terminologies
In this document the terminology listed below is used as follows:
▪ Customer and consumer refer to any person who transacts business through the
ATM.
▪ Device and unit refer to the standard and optional ATM equipment, such as monitor,
card reader, printer and dispenser.
▪ Fascia refers to the entire front portion of the unit, including the portion where the
customer transacts business.
▪ Module refers to a plug-in device that can be serviced or replaced.
▪ Note(s) and bill(s) refer to the individual documents loaded into and dispensed from
the dispenser.
▪ Servicing and maintenance refer to the supervisor, operator and technician’s tasks
performed to keep the ATM operational.
▪ Screen refers to the text appearing on the customer display.
▶
In this document the abbreviations listed below is used as follows:
# Abbreviations Description
1 AD board Analog to Digital conversion board
2 ADA The American Disabilities Act
3 ALG Alignment Module
4 AP Application Program
5 Assy Assembly
6 BATT S/W Battery Switch
7 BC Bill Checker
8 BM1 Body Module1
9 BM2 Body Module2
10 BM3 Body Module3
11 BMD Body Module-Down (Lower Body of the Module)
12 BMU Body Module-Up (Upper Body of the Module)
13 BUNDLE Bulk Note Separation Module
14 BRM Bill Recycling Module
15 CAM Camera Unit
16 CASSETTE Cash & Check Cassette
17 CCIM Cash & Check In Module
18 CCR Contactless Card Reader
19 CE Control Electronics
20 CSM Customer Service Module
21 DPC Deposit Cassette
22 Earphone Jack Voice Converter for Visually Disabled Persons (ADA)