Rev. B
Current as of 2019-12-27
19721 PS24105-Z Zoom Gear for
Panasonic Lumix S 24-105 f4
Instruction Manual
F
OREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recognise the
requirements of professional as well as amateur underwater photographers
and fulfill them through the innovative designs of our products. We strive to
achieve a high level of user-friendliness by allowing stress-free installation
and easy operation of all important functions of the camera.
Please read this manual carefully before using the product, this will maximise
its performance as well as its lifetime.
W
ARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for consumer
use.
This warranty only applies to products purchased from authorised
NAUTICAM dealers and does not extend beyond the original retail purchaser.
To return your product for service, please contact your regional authorized
service centre(s). Please note that this warranty only applies when the
product is purchased in the territory where the service centre is located.
NAUTICAM does not hold responsibility for damage, of any nature, to any
equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the inability
to capture images even if it is due to the malfunctioning of our products.
Unauthorised modifications and/or repairs of our products will automatically
invalidate the warranty.
I
DENTIFICATION OF
P
ARTS
M
OUNTING THE
G
EAR ON
L
ENS
Insert the plastic c-ring as shown and place it over the lens rubber zoom ring.
Insert the gear on the plastic c-ring until it reaches the flange of the plastic c-
ring.
To remove the gear, reverse the above steps.
The tightness between the gear and the lens can be adjusted by removing or
adding rubber grips on either side of the plastic c-ring, spare rubber grips are
included in the package.
Plastic c-ring
Zoom gear
Rubber grip
Spare rubber grips