Current as of 2022-06-01
Instruction Manual for
Shade for 100° Objective Lens
PN# 87513
F
OREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recognize the
requirements of professional as well as amateur underwater
photographers and fulfill them through the innovative designs of our
products. We strive to achieve a high level of user-friendliness by
allowing stress-free installation and easy operation of all important
functions of the camera.
Please read this manual carefully before using the product, this will
maximize its performance as well as its lifetime.
W
ARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for
consumer use.
This warranty only applies to products purchased from
authorized NAUTICAM dealers and does not extend beyond the original
retail purchaser.
To return your product for service, please contact your regional
authorized service center(s). Please note that this warranty only applies
when the product is purchased in the territory where the service center is
located.
NAUTICAM does not hold responsibility for damage, of any nature, to
any equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning of our
products.
Unauthorized modifications and/or repairs of our products will
automatically invalidate the warranty.
1.
Make sure the locking lever is in open position.
2.
Align the lens alignment mark on the shade to the shade
alignment mark on the objective lens and then push it in.
3.
Lock the shade by pushing the locking lever downwards.
I
DENTIFICATION OF
P
ART
I
NSTALL TO
100°
O
BJECTIVE
L
ENS
Shade for 100° Objective Lens
Locking Lever (in open position)
Lens Alignment Mark
Velcro Strap for Holding
Objective Lens
